DS Dichtungstechnik GmbHoffers a comprehensiveand completerange of services. Wearethe supplier ofallthese requirements are metto the highest quality,certified with all majortest certificates.Germany-EuropeandWorldwide.
The DS Ring GRS is an ideal wedge-shaped slip-ring with a wide installation face. The seal combines an easy and secure pipe mountability with highest possible tightness security.
DSLKDis adouble lipcompression sealmade from elastomers withdense structure for thepermanentsealingof the compoundsofsocket pipesand boxframe partsmade of concrete andreinforced concrete.
DS GRV is a pre-lubricated slip ring seal made from elastomers with dense structure for the permanent sealing of concrete and reinforced concrete socket pipe connections.
At the setting up the DS Rollring K is rolled and deformed into the socket gap. The DS Rollring M is used as a sliding ring in a chamber or in front of a shoulder.
DSringM is asealing ringmade from elastomers withdense structure for thepermanent sealingof the compoundsofsocket pipesmade of concrete andreinforced concrete.
The DS BL-S is an integrated manhole seal which tightens on the hole depths of the socket and length of the spigot end and due to this a higher tightness security is reached.
DSBL-S is asealing ringmade from elastomers withdense structureformanhole componentsofconcrete and reinforcedconcrete according to DINEN 1917and DINV4034-1.The sealing ring isfirmly connected to thesleevein the preparationof the shaftcomponents.
The DS TOPSEAL PLUS is an integrated manhole seal with connected load transfer hose for the ECONORM-manhole system. Seal, sand hose form a unity with the manhole section which allows a quick and secure mounting at any weather condition.
The DS GRS is an ideal wedge-shaped slip-ring with a wide installation face. The seal combines an easy and secure pipe mountability with highest possible tightness security.
DSringM is asealing ringmade from elastomers withdense structure for thepermanent sealingof the compoundsofsocket pipesmade of concrete andreinforced concrete.
The DS PDK is an immediately checkable double slip ring for the permanent seal. The check of the pipe joint can happen while the double slip ring is mounted or later.
The DS KRP is a front seal for counter tensed pipe systems with non rotationally symmetrical cross sections like for example box culverts, egg-shaped and horse-shoe as well as plate structures.
DS LKs is a seal with bored holes for the connection of pipes made out of different materials (e.g. PVC, PE, cast iron, fiber reinforced cement, concrete, stoneware) in manhole components or pipes made out of concrete or reinforced concrete.
The DS GRS is an ideal wedge-shaped slip-ring with a wide installation face. The seal combines an easy and secure pipe mountability with highest possible tightness security.
DS GS is a slip ring seal made from elastomers with dense structure for the permanent sealing of concrete pipes and reinforced concrete socket pipes and socket box culverts.
Concrete sockets DN 150 to DN 400 with formed or drilled sealing stop in manhole base units for drains and sewage pipelines allowing the connection of different types of pieces with DS GRS compressed in.
DS LK is a slip ring seal made from elastomers with dense structure for the permanent sealing of concrete pipes and reinforced concrete socket pipes and socket box culverts.
DS BL-R is a sealing ring made from elastomers with dense structure for the DS BL-R plug-in socket, a connection for concrete pipes and reinforced concrete pipes according to DIN EN 1916 and DIN V 1201, whereby the seal is firmly embedded in the socket during manufacture of the pipe.
DS BL-T is a sealing ring made from elastomers with dense structure for the DS BL-T plug-in socket, a connection for concrete pipes and reinforced concrete pipes according to DIN EN 1916 and DIN V 1201, whereby the seal is firmly embedded in the socket during manufacture of the pipe.
To fulfill the extremely high requirements for the connection into pipelines made out of concrete or reinforced concrete as well as clay pipes, a long lasting and secure introduction of industrial or communal sewage water has to be guaranteed. These high requirements can only be fulfilled by a connecting piece which – besides its basic functional properties – primarily is easy and uncomplicated to assemble on site.
DS socket ring 55/70 is an integrated sealing element out of elastomer with dense structure according to be used in concrete manholes for the tight connection of spigot ends from stoneware pipes with socket K type according to DIN EN 295-1, connection system C.
The DS TOK PP-Profile made of elastomers with closed cellular strucure is a in the socket reflector stickable compressible pad for the permanent closure of press joints.
